Ranger 4WD V6-4.0L (2009)
3. Install the trim cover and all of the hog rings.
4. Pull the trim cover down and secure the hook-and-loop strips to the backrest foam pad.
5. Attach the backrest J-clip.
6. Install the backrest assembly. For additional information, refer to Seat Backrest - Front, 60 Percent See: Removal and Replacement/Seat Backrest
- Front, 60 Percent.
Rear Seats
Seat Backrest - Rear, 2-Door, SuperCab
2-Door SuperCab