ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seat Track - 60 Percent|Page 5307 > < Seat Track - 60 Percent|Page 5305
Page 1
background image

Seat Track: Service and Repair
Seat Track - Bucket and 40 Percent

Seat Track - Bucket and 40 Percent

Removal

WARNING: Never probe the electrical connectors on safety belt buckle/retractor pretensioners or adaptive load limiting retractors. Failure to
follow this instruction may result in the accidental deployment of the safety belt pretensioners or adaptive load limiting retractors, which
increases the risk of serious personal injury or death.

WARNING: Make sure the front passenger seat repair is complete, the seat and all attached components (head restraint, seat side shield, etc.)
are correctly assembled, and the seat is correctly installed to the vehicle before carrying out the System Reset. Failure to follow these
instructions may result in incorrect operation of the occupant classification sensor (OCS) system and increases the risk of serious personal
injury or death in a crash.

NOTICE: To prevent system failure, it is necessary to carry out the Occupant Classification Sensor (OCS) system reset when a front passenger 
seat cushion is disassembled, a new trim cover installed or an OCS system service kit is installed. A scan tool is used to carry out the OCS
system reset.

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

All seats

1. Remove the affected seat. For additional information, refer to Seat - Front  See: Service and Repair/Front Seats/Seat - Front.

2. Remove the backrest assembly. For additional information, refer to Seat Backrest - Front, Bucket and 40 Percent  See: Seat Back/Service and

Repair/Removal and Replacement/Seat Backrest - Front, Bucket and 40 Percent.

Passenger seat

3. NOTE: For correct installation, note position of wire harness routing.

Release the wire harness and electrical connector retainers from the seat cushion frame.

All seats

4. Remove the seat track assist spring.

Seat Track - 60 Percent|Page 5307 > < Seat Track - 60 Percent|Page 5305