Ranger 4WD V6-4.0L (2009)
Tailgate Release Handle: Service and Repair
Tailgate Release Handle
Tailgate Release Handle
Removal and Installation
1. Remove the 8 screws and the tailgate access cover.
-
To install, tighten to 5 Nm (44 lb-in).
2. Open the clips and disconnect the tailgate latch actuating rods from the remote control.
3. Remove the tailgate latch remote control nuts.
-
To install, tighten to 12 Nm (106 lb-in).
4. Remove the tailgate release handle.
5. To install, reverse the removal procedure.