Ranger 4WD V6-4.0L (2009)
Front Door Window Glass Weatherstrip: Service and Repair
Door Glass Top Run
Door Glass Top Run
Removal and Installation
Top run and center run
1. Remove the front door window glass. For additional information, refer to Window Glass - Front Door See: Doors, Hood and Trunk/Doors/Front
Door/Front Door Window Glass/Service and Repair/Window Glass - Front Door.
Center run
2. Remove the top and bottom center door glass run retainer nuts.
-
To install, tighten to 9 Nm (80 lb-in).
3. Remove the center door glass run.
Top run
4. Remove the front door beltline inner and outer weatherstrips.
5. Remove the door glass top run bolt.
-
To install, tighten to 12 Nm (106 lb-in).
6. Remove the door glass top run.
Top run and center run
7. To install, reverse the removal procedure.
