Ranger 4WD V6-4.0L (2009)
material from entering the brake tube ports.
Disconnect the 5 HCU brake tube fittings from the HCU.
-
To install, tighten to 17 Nm (150 lb-in).
3. Remove the 2 HCU-to-bracket nuts and the HCU assembly.
-
To install, tighten to 5 Nm (44 lb-in).
4. If necessary, remove the 2 HCU bracket-to-frame nuts, the 2 HCU bracket-to-frame bolts and the HCU bracket.
-
To install, tighten to 12 Nm (106 lb-in).
5. To install, reverse the removal procedure.
6. Bleed the brake system.
