Ranger 4WD V6-4.0L (2009)
6. Separate the LH rear parking brake cable from the frame bracket.
-
Remove the equalizer.
-
Compress the parking brake cable clip.
-
Separate the LH rear parking brake cable from the frame bracket.
7. Separate the RH rear parking brake cable from the RH hydraulic brake tube clips.
8. Unclip the RH rear parking brake cable from the brake tube clip on top of the rear axle housing.
9. Disconnect the parking brake cables from the parking brake levers.
10. Compress the clips and disconnect the rear parking brake cables from the backing plates.
11. To install, reverse the removal procedure.