Ranger 4WD V6-4.0L (2009)
Cruise Control Servo Cable: Service and Repair
Speed Control Cable
NOTE: 4.0L shown, others similar.
Removal and Installation
Vehicles with 2.3L engine
1. Remove the 2 bolts and the accelerator control splash shield.
2. Disconnect the speed control cable from the throttle body.
1. Disconnect the cable from the throttle lever.
2. Press the tabs and separate the speed control cable from the intake manifold.
Vehicles with 4.0L engine
3. Remove the 3 bolts and the accelerator control splash shield.