Ranger 4WD V6-4.0L (2009)
Hose/Line HVAC: Service and Repair
Compressor Manifold and Tube Assembly
Compressor Manifold and Tube Assembly - 4.0L
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Recover the refrigerant.
3. Remove the Air Cleaner (ACL) outlet tube.
4. Disconnect the pressure cutoff switch electrical connector.
5. Remove the nut and position the wire harness aside.
6. Remove the condenser inlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
