ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Dimmer Switch > < Initial Inspection and Diagnostic Overview|Page 5727
Page 3
background image

GO to X3.

No

The system is operating correctly at this time. The DTC may have been set due to an intermittent communication drop off from high network traffic.

-------------------------------------------------
X3 RETRIEVE THE RECORDED DTCs FROM THE PCM SELF-TEST

-

Enter the following diagnostic mode on the scan tool: PCM Self-Test.

-

Check for recorded PCM DTCs from the self-test.

-

Is DTC U0155 recorded?

Yes

REFER to Information Bus to diagnose no communication with the IC.

No

GO to X4.

-------------------------------------------------
X4 CHECK THE NETWORK OPERATION

-

Enter the following diagnostic mode on the scan tool: Network Test.

-

Carry out the network test.

-

Does the IC pass the network test?

Yes

INSTALL a new IC. TEST the system for normal operation.

No

REFER to Information Bus to diagnose no communication with the IC.

-------------------------------------------------

Dimmer Switch > < Initial Inspection and Diagnostic Overview|Page 5727