Ranger 4WD V6-4.0L (2009)
Dimmer Switch: Service and Repair
Instrument Panel Dimmer Switch
Removal and Installation
1. Remove the audio unit.
2. Remove the center instrument panel finish panel.
-
Remove the 2 screws.
-
Disconnect the electrical connectors.
3. Remove the 2 bolts and position aside the hood latch release handle.
4. Remove the 2 screws and remove the instrument panel steering column cover.
5. Remove the 5 bolts and the lower instrument panel reinforcement.
-
To install, tighten to 11 Nm (97 lb-in).
6. If equipped, position the column-mounted transmission range selector lever to the lowest position.
7. Remove the Instrument Cluster (IC) finish panel.
-
Remove the 5 screws.
-
Disconnect the electrical connectors.
8. Remove the 2 screws and the instrument panel dimmer switch.
9. To install, reverse the removal procedure.
