ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2019 > < Initial Inspection and Diagnostic Overview|Page 2017
Page 29
background image

GO to I12.

No

CONNECT the negative battery cable. GO to I23.

-------------------------------------------------
I12 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE SJB DISCONNECTED

-

Disconnect: SJB C2280d.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to I13.

No

CONNECT the negative battery cable. GO to I24.

-------------------------------------------------
I13 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE RCM DISCONNECTED

-

Disconnect: RCM C2041a.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to I14.

No

CONNECT the negative battery cable. GO to I25.

-------------------------------------------------
I14 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE OCSM DISCONNECTED

-

Disconnect: OCSM C3159.

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Initial Inspection and Diagnostic Overview|Page 2019 > < Initial Inspection and Diagnostic Overview|Page 2017