Ranger 4WD V6-4.0L (2009)
Inertia Fuel Shutoff Switch: Service and Repair
Inertia Fuel Shutoff (IFS) Switch
Removal and Installation
1. NOTE: The Inertia Fuel Shutoff (IFS) switch is located behind the RH cowl panel.
Remove the RH scuff plate and cowl panel.
2. Remove the 2 screws and the IFS switch.
-
To install, tighten to 2 Nm (18 lb-in).
3. Disconnect the IFS switch electrical connector.
4. To install, reverse the removal procedure.
