Ranger 4WD V6-4.0L (2009)
Four Wheel Drive Selector Switch: Service and Repair
Mode Select Switch (MSS)
Removal and Installation
1. NOTICE: Before removing the audio unit, it must be placed in shipment mode. Failure to follow this instruction may result in damage to
the audio unit.
Put the audio unit in shipment mode.
2. Insert the Audio Unit Removing Tool, then remove and support the audio unit.
3. Disconnect the audio unit electrical connector(s) and antenna cable.
4. Remove the 2 instrument panel finish panel screws. Disengage the spring clips at the top. Remove the instrument panel finish panel.
