Ranger 4WD V6-4.0L (2009)
3. Remove the nut and safety belt buckle pretensioner.
-
To install, tighten to 40 Nm (30 lb-ft).
4. To install, reverse the removal procedure.
5. Install the seat.
6. Check the active restraint system for correct operation. For additional information, refer to Safety Belt System See: Testing and Inspection.
Safety Belt Buckle and Pretensioner - 40 Percent
Safety Belt Buckle and Pretensioner - 40 Percent
NOTE: RH shown, LH similar.
Removal and Installation
WARNING: After any crash, all of the following safety belt assemblies and attaching hardware must be inspected by an authorized dealer to
verify correct function:
-
Retractors
