Ranger 4WD V6-4.0L (2009)
Power Steering Pump: Service and Repair
Power Steering Pump
Power Steering Pump - 4.0L
Removal and Installation
NOTICE: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. NOTICE: Do not allow power steering fluid to contact the accessory drive belt or the belt may be damaged.
Using a suitable suction device, remove the power steering fluid from the reservoir.
2. Remove the engine cooling fan.
3. Remove the power steering pump pulley. For additional information, refer to Power Steering Pump Pulley - 4.0L See: Power Steering Pump
Pulley.
4. Compress the clamp and disconnect the power steering pump supply hose from the power steering fluid reservoir.
5. Disconnect the pressure line-to-pump fitting.