Ranger 4WD V6-4.0L (2009)
16. NOTICE: Lubricate fluid filter O-ring seals with transmission fluid or they may be damaged.
Lubricate and install new O-ring seals onto the transmission fluid filter.
17. Install the transmission fluid filter.
1. Position the transmission fluid filter on the main control valve body.
2. Install the transmission fluid filter screw.
-
Tighten to 10 Nm (89 lb-in).
18. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage, if not damaged, the gasket should be reused.
Install the transmission fluid pan.
1. Position the transmission fluid pan gasket on the transmission fluid pan.
2. Install and align the transmission fluid pan.
19. Loosely install the transmission fluid pan screws.
20. Tighten the transmission fluid pan screws in a crisscross pattern.
-
Tighten to 10 Nm (89 lb-in).
