Ranger 4WD V6-4.0L (2009)
Clutch Disc: Procedures
Clutch Disc Check
1. NOTE: Install a new clutch disc if any of these conditions are present. Always install a new clutch pressure plate when installing a new clutch.
NOTE: For clutch discs that have oil or grease contamination, eliminate the source of the contamination.
NOTE: If the clutch disc springs are loose enough to rattle they will not cause noise when the vehicle is operating.
Inspect the clutch for the following:
-
Oil or grease contamination
-
Worn or loose facings
-
Distortion
-
Broken springs
-
Burrs or uneven wear on the splines
-
Wear or damage on the clutch disc surface