Ranger 4WD V6-4.0L (2009)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder and Reservoir
Clutch Master Cylinder and Reservoir
Removal and Installation
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result
in serious personal injury.
NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or
plastic surface, immediately wash the surface with water.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: Clean the area around the quick disconnect coupling.
Using the Hydraulic Line Disconnect Tool, disconnect the hydraulic tube from the clutch slave cylinder.
3. Remove the 2 screws and the lower steering column finish panel.
4. Remove the 5 bolts and the lower reinforcement panel.