Ranger 4WD V6-4.0L (2009)
Apply a continuous bead of silicone sealant to the differential housing cover.
3. NOTE: If possible, allow one hour before filling the axle with lubricant to allow the silicone sealant to cure.
Install the differential housing cover and the 10 bolts.
-
Tighten to 45 Nm (33 lb-ft).
4. NOTE: When filling a Traction-Lok(R) axle with new lubricant, first fill the axle with 118 ml (4 oz) of friction modifier.
NOTE: Service refill capacities are determined by filling the rear axle to the level shown.
Remove the filler plug, fill the rear axle with approximately 2.4L (5 pt) of rear axle lubricant and install the fill plug.
-
Tighten to 52 Nm (38 lb-ft).