Ranger 4WD V6-4.0L (2009)
3. NOTE: The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If
possible, allow one hour before filling with lubricant to make sure the silicone sealant has correctly cured.
Install the differential housing cover and 10 bolts.
-
Tighten to 45 Nm (33 lb-ft).
4. NOTE: First fill the rear axle with 118 ml (4 oz) of friction modifier.
NOTE: Service refill capacities are determined by filling the rear axle to the level shown.
Remove the filler plug, fill the rear axle with 2.54L (5.37 pt) of rear axle lubricant and install the filler plug.
-
Tighten to 52 Nm (38 lb-ft).
