1
-
Fuel rail with fuel injectors
4
-
Idle Air Control (IAC) sensor (behind the intake manifold)
5
-
Temperature and Manifold Absolute Pressure (T-MAP) sensor (behind the intake manifold)
The intake manifold is secured to the cylinder head by five bolts.
O-rings are used to seal between the intake manifold and the cylinder head.
The fuel distribution pipe with the four injectors is inserted on the upper side of the intake manifold.
The TP sensor is located on the throttle valve housing.
The IAC valve and the T-MAP sensor are positioned on the inside of the intake manifold.
Air duct