Ford Workshop Service and Repair Manuals > Streetka 2003.5 (01.2003-07.2005) > Mechanical Repairs | 4 Electrical | 419 Electronic Feature Group | 419-01B Anti-Theft - Passive | Description and Operation | Diagnosis and Testing | General Procedures | Anti-Theft Security Access

Erasing All Key Codes Using Diagnostic Equipment > < Key Programming Switch State Control

Anti-Theft - Passive - Anti-Theft Security Access

Streetka 2003.5 (01/2003-07/2005)

General Procedures

General Equipment

Worldwide Diagnostic System (WDS) (418-F224)

NOTE:Anti-Theft System (PATS) security access must be granted to erase or program ignition keys or to enable or disable the ignition key programming switch state control. The anti-theft security access procedure requires access to the GSEVIN database in order to obtain the coded security access.

NOTE:When installing a new powertrain control module (PCM), the following sequence must be completed:

1. Ignition Key Programming.
2. Module Initialization.

NOTE:When installing a new instrument cluster, the following must be completed:

1. Module Initialization.

Insert an ignition key into the ignition lock cylinder and turn the ignition key from the 0 position to the II position.

From the diagnostic tool menu Select: Body/Security/PATS Functions. Follow the instructions on the screen.

Mechanical Repairs
4 Electrical
419 Electronic Feature Group
419-01B Anti-Theft - Passive / Description and Operation
Diagnosis and Testing
General Procedures
Anti-Theft Security Access

Erasing All Key Codes Using Diagnostic Equipment > < Key Programming Switch State Control