ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Windshield Wiper Motor > < Front Wiper Pivot Arm
Wipers and Washers - Windshield Washer Pump Streetka 2003.5 (01/2003-07/2005)
Removal and Installation

Removal

  1. Standard preparatory measures.
    • Note the radio keycode.
    • Make a note of the programmed radio stations.
    • Lay protective covers over the fenders.
  1. CAUTION:
    CAUTION:Disconnect the battery negative lead.
    Remove the windscreen washer reservoir.
    For additional information, refer to Windshield Wiper Motor - in this section.

  1. Remove the windscreen washer pump together with the rubber seal.

Installation

  1. NOTE:
    NOTE:Coat the rubber seal with soap solution prior to installation.
    Fit the seal and the windscreen washer pump.
  1. Install the windscreen washer reservoir.
    For additional information, refer to Windshield Wiper Motor - in this section.
  1. Standard finishing operations.
    • Connect the battery negative lead.
    • Remove the protective covers.
    • Enter the radio keycode.
    • Reprogramme the preset radio stations.
    • Adjust the clock.
    • Carry out a road test to enable the PCM to collect data.
  1. Check the windscreen washer pump is working correctly and that there are no leaks.

Windshield Wiper Motor > < Front Wiper Pivot Arm