ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Bumper Cover - Convertible > < Convertible Top Assembly

Streetka 2003.5 (01.2003-07.2005)

Bumpers - Front Bumper Cover—Convertible Streetka 2003.5 (01/2003-07/2005)
Removal and Installation

Removal
  1. Detach the bumper cover from the radiator grille opening panel reinforcement.
  1. Remove the front wheels and tires. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Detach the bumper cover from the radiator splash shield on both sides.

  1. Remove the fender splash shield on both sides.

  1. Remove the bumper cover retaining screws on both sides.

  1. NOTE:
    NOTE:With the aid of another technician, support the bumper cover.
    Detach the bumper cover from the fender on both sides.
    • Detach the clips.

  1. NOTE:
    NOTE:With the aid of another technician, support the bumper cover.
    Disconnect the fog lamp electrical connector on both sides.
  1. Remove the bumper cover.

Installation

  1. To install, reverse the removal procedure.

Rear Bumper Cover - Convertible > < Convertible Top Assembly