Taurus L4-153 2.5L HSC (1986)
LOWER STEERING COLUMN
Instrument Panel - Disassembled View
6.
Remove the ignition lock assembly.
a. Turn the key to the ON position.
b. Insert a 1/8" (3.17mm) pin or punch into the hole in the trim below the ignition cylinder.
c. Push in on the pin while pulling the lock cylinder out.
d. To reinstall, reverse procedure confirming the cylinder is FULLY seated prior to turning the key to the OFF position.
7.
Remove steering column opening cover attaching screws, then the cover.
