ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Ash Tray Lamp: > < Diagram Information and Instructions|Page 10813
Page 1
background image

Ash Tray Lamp: Customer Interest
Ash Tray Lamp/Cigar Lighter - Inoperative

Article No. 86-22-9

CIGAR LIGHTER - INOPERATIVE - WIRE HARNESS CUT

LAMP - ASH TRAY INOPERATIVE - WIRE HARNESS CUT

FORD 1986-87 TAURUS

An inoperative cigar lighter or ash tray lamp may be caused by the 14401 wire harness being damaged by a flange located behind the ash tray. Use the
following procedure to repair any damaged wires and cover the harness with a section of heater hose to prevent future damage.

1.

Remove the radio and ash tray.

2.

Repair the shorted wires as required.

Figure 10

3.

Split a 3" x 5/8" I.D. heater hose and slip it over the wire harness as shown in Figure 10. Tape the heater hose into place with electrical tape.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP14401D86
TIME:

0.5 Hr. DLR. CODING: Basic Part No. 14401 - Code: 46

All Technical Service Bulletins for Ash Tray Lamp: > < Diagram Information and Instructions|Page 10813