ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Wiper Motor|Circuit Breaker Test|Page 11556 > < Wiper Motor|Circuit Breaker Test
Page 1
background image

Wiper Motor: Testing and Inspection
Wiper Motor Current Draw Test

NOTE:  Electric wiper motors contain permanent magnets made of ceramic. This is a hard glass-like material that can shatter or crack if the motor
receives a severe physical shock.

Do not handle any windshield wiper motor abusively when diagnosing wiper operations, because it will damage the magnets and make the motor
inoperative. Rough handling of new replacement motors may also damage the magnets. Disconnect the linkage from the motor and disconnect the
electrical plug to test the motor on the vehicle. Connect the green lead from the test equipment to the battery positive (plus) post. Connect the positive
(red) lead from the tester first to the low-speed connection and then to the highspeed connections at the connector plug as shown. In either case, the
current draw should not exceed 3 amperes.

Wiper Motor|Circuit Breaker Test|Page 11556 > < Wiper Motor|Circuit Breaker Test