Taurus V6-182 3.0L (1987)
17.
Remove vehicle from hoist and place on alignment rack.
18.
Reset rear toe to nominal specification of +0.06~ toe-in for each individual wheel.
19.
Loosen lower arm pivot nut approximately one
(1)
turn.
20.
Adjust camber to -0.7~ by rotating cam bolt.
NOTE:
Rim of cams will ride against ribs which are formed in crossmember bracket. The cam is not intended to be turned a full 360~.
21.
Hold cam bolt head in position with a back-up wrench and tighten inner pivot nut to specification (40-60 ft.lbs./54-81 N-m) Take care not to
disturb cam/alignment setting while tightening.
PART NUMBER
PART NAME
CLASS
E7DZ-5K751-A
Camber Kit
CG
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP871608A
TIME:
1.8 Hrs. DLR. CODING: Basic Part No. 5K751 - Code: 07
