Taurus V6-182 30L DOHC SHO (1992) Brake Master Cylinder Removal
Brake Master Cylinder: Service and Repair
Removal
With Antilock Brakes
CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid
from contacting these areas.
1. Depress brake pedal several times to exhaust all vacuum in system.
2. Remove brake tubes from primary and secondary outlet ports of master cylinder and pressure control valves (wagon only). Cover the ends of the
lines to prevent dirt from entering system.
3. Disconnect brake warning indicator connector.
4. Disconnect Hydraulic Control Unit (HCU) supply hose at master cylinder and secure in a position to prevent loss of brake fluid.
5. Remove two nuts retaining master cylinder to brake booster assembly.
Master Cylinder
6. Slide master cylinder forward and upward from vehicle.
Without Antilock Brakes
CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid
from contacting these areas.
1. Remove brake tubes from primary and secondary outlet ports of master cylinder and pressure control valves (wagon only). Cover the ends of the
lines to prevent dirt from entering system.
2. Disconnect brake warning lamp connector.
3. Remove two nuts attaching master cylinder to brake booster assembly.
Master Cylinder
4. Slide master cylinder forward and upward from vehicle.
