Taurus V6-182 3.0L DOHC SHO (1992)
Crankshaft: Service and Repair
1.
Loosen accessory drive belts, then remove RH front wheel.
2.
Remove damper attaching bolt.
3.
Remove drive belts from crankshaft damper.
4.
Using suitable puller tool No. T67L-3600-A or equivalent, remove crankshaft damper from crankshaft.
5.
Remove timing belt as described under TIMING BELT.
6.
Using suitable puller or equivalent, remove crankshaft timing gear. Ensure not to damage crankshaft sensor or shutter.
7.
Using seal puller tool No. T78P-3504-N or equivalent, remove front oil seal.
8.
Reverse procedure to install.
