Taurus V6-182 3.0L DOHC SHO (1992)
Compressor Clutch: Service and Repair
With FX-15 A/C Compressor
A/C Clutch - Exploded View
REMOVAL
A/C Clutch Hub Retaining Bolt - Removal
1. Remove the clutch hub retaining bolt. Use Spanner Wrench T7OP-4067-A or equivalent.
2. Pull the clutch hub and the shims from the compressor shaft. If the hub cannot be pulled from the compressor shaft, screw an 8 mm bolt into the
shaft hole of the clutch hub to force the hub from the shaft.