ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hazard Warning Switch|Component Information > < Hazard Warning Switch|Specifications|Page 10652
Page 2
background image

25 rpm.

STEP 10

Turn engine OFF and disconnect battery for 10 minutes minimum.

STEP 11

Reconnect the in-line SPOUT connector.

STEP 12

Remove Rotunda Tool T89P-9600-AH from the PCV and canister purge ports. Reconnect the PCV and canister purge hoses.

STEP 13

Reconnect the ISC-BPA valve. Verify the throttle is not sticking to the bore and the linkage is not preventing the throttle from closing.

STEP 14

If the vehicle still exhibits an idle problem, check for other possible causes.

Hazard Warning Switch|Component Information > < Hazard Warning Switch|Specifications|Page 10652