Taurus V6-182 3.0L DOHC SHO (1992)
5. Insert Tappet Holder T89P-6500-B or equivalent, and remove compressor tool.
6. Using Pick Tool T7 1 P- 19703-C or equivalent, lift adjusting shim and remove shim with magnet.
7. Determine size of shim by numbers on bottom face of shim or by measuring with a micrometer. Install replacement shim that will permit specified
clearance. Install shim with numbers down. Ensure shim is properly seated.
8. Release tappet holder by installing tappet compressor tool.
9. Repeat procedure for each valve by rotating engine crankshaft as necessary.
10. After all valve clearances are checked and/or adjusted, inspect all valve shims to ensure that they are fully seated in their bucket tappets.
11. Inspect cylinder head cover gaskets and replace if damaged.
12. Install cylinder head covers and intake manifold assembly.
13. Connect negative battery cable.
