Taurus V6-182 3.0L DOHC SHO (1992)
Child Seat Tether Attachment: Locations
Rear Window Tray Tether Attachment
Sedan
On Sedan models, three (one each side and one near the center) 9.0 mm (0.35-inch) top tether attachment holes in the rear window tray structure (behind
the rear seat) have been provided for attachment of the anchor hardware supplied with the safety seat, if required. For easy identification, these holes are
marked with the letter "T" stamped behind the hole.
Wagon Without Auxiliary Rear Seat
On all Wagon models, two (one each side) steel U-shaped load floor anchors located on the forward auxiliary floor trim panel have been provided for
attachment of the child safety tethers. The tether anchors are easily accessed by inserting a small screwdriver under the attachment anchor covers and
prying them off the anchors.
WARNING: IF THE ANCHOR BOLTS ARE EVER REMOVED, THE HOLE(S) IN THE FLOOR MUST BE SEALED TO PREVENT THE
POSSIBILITY OF FUMES ENTERING THE PASSENGER COMPARTMENT.
Wagon With Auxiliary Rear Seat
