Taurus V6-182 3.0L DOHC SHO (1992)
Knuckle On Press (DOWN)
2. Place Front Bearing Spacer T86P-1104-A2 or equivalent step side down on hydraulic press plate and position knuckle (outboard side down) on
spacer. Position a new bearing in inboard side of knuckle. Install Bearing Installer T86P-1104-A3 or equivalent (undercut side facing bearing), on
bearing outer race and press bearing into knuckle. Ensure that bearing seats completely against shoulder of knuckle bore.
CAUTION: Bearing Installer T86P-1104-A3 or equivalent must be positioned as indicated above to prevent bearing damage during
installation.
3. Install a new snap ring (part of bearing kit) in knuckle groove using snap ring pliers.