Taurus V6-182 3.0L DOHC SHO (1992)
Constant Velocity Joint Boot: Service and Repair
Outboard Dust Seal
Disassembly
Fig. 12 Dust Seal Removal
1.
With halfshaft removed, use a light duty hammer and screwdriver to tap evenly around seal until unseated and remove seal, Fig. 12.
Assembly
Fig. 13 Dust Seal Installation
Using spindle/axle seal tool T83T-3132-A1 and dust seal installer tool T83P-3425-AH or equivalent, install dust seal, Fig. 13. The dust seal flange must
face outboard.
