ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Brake Pedal Pushrod Retainer Inspection|Page 7454 > < Recall 94V198000: Master Cylinder Pushrod Clip Defect
Page 1
background image

Technical Service Bulletin # 94S96

Date: 941201

Recall - Brake Pedal Pushrod Retainer Inspection

94S96

SAFETY RECALL

Certain 1995 Model Taurus and Sable Passenger Cars for Inspection and, if Necessary, Installation of a Brake Pedal Pushrod Retainer

Dealer Letter

Attachment I
^

Administrative Information

Attachment II
^

Labor Allowances

^

Parts Requirements

^

Technical Instructions

Customer Notification Letter

Attachment I - Administrative Information

OASIS
You must use OASIS to determine if a vehicle is eligible for this recall.

Please Note

Correct all vehicles in stock before delivery. Federal Law requires dealers to complete any outstanding safety recall service before a new vehicle is
delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $1,000 per vehicle.

Promptly Correct
Affected vehicles on the enclosed list.
 
Other eligible vehicles which are brought to your dealership.

Dealer-Owner Contact
Immediately contact any owner whose name is not on the list. Give owner a copy of the Owner Letter.

District Contact
Advise district office if:
 
^

an owner cannot be contacted.

^

an owner does not make a service date.

FCSD Contact
Talk with your FCSD Service Zone Manager or the Dealer Assistance Center about all matters.

Claim submission
For dealers not on ACESII Pilot, submit 1864 claims using DWE for all completed vehicles. You may use your original 1863 for your record file copy.
For dealers on ACESII Pilot, submit claims via DWE.

Warranty and Policy Manual
For dealers not on ACESII Pilot, see Section 6.3, pages 5 through 8, of your Warranty and Policy Manual for claims preparation. For dealers on ACESII
Pilot, see Section 5 and 6 of the ACESII Manual.

Refunds
For dealers not on ACESII Pilot, see Section 6.3, page 9 of your Warranty and Policy Manual. Use customer Concern Code X99 for safety recalls. For
dealers on the ACESII Pilot, see Section 3-55 of the ACESII Manual.

Attachment II - Labor/Parts Info. and Technical Instructions

Brake Pedal To Master Cylinder Pushrod Retainer

Claim Procedure For Dealers Not On ACESII Pilot:

INSPECT BRAKE PEDALS

LABOR TIME

LABOR CODE

Inspect for Improperly Installed or

0.2 Hrs.

Insert in Box "A" on Form 1864

Recall - Brake Pedal Pushrod Retainer Inspection|Page 7454 > < Recall 94V198000: Master Cylinder Pushrod Clip Defect