Taurus V6-182 3.0L FF (1995)
10.
Using the supplied nut and bolt attach fuse holder to the under side of the radiator support sheet metal. Tighten to 3.5-4.5 Nm (31-41 lb/in). Refer
to Figure 5.
CAUTION:
Dry fit all of the connectors. Do not use any conductive lubricant.
11.
Connect jumper harness to the cooling fan motor harness and to existing vehicle harness.
12.
Secure the vehicle wiring harness to the fan shroud mounting pad located at the 11 o'clock position (if vehicle so equipped) or at the 12 o'clock
position, using the existing harness retainer. See Figure 5.
13.
Connect battery negative cable, then remove memory saver.
14.
Check cooling fan motor for proper operation.
15.
Install sight shield.
16.
Close hood.
Affected Vehicles:
1992-1995 Taurus/Sable Equipped With 3.8L Engine
Required Parts:
F43Z-14k095-DA
Installation Procedure:
1.
Open hood
2.
Install memory saver, then disconnect battery negative cable.
