Taurus V6-182 3.0L FF (1995)
The fuse holder is to be mounted under the radiator support sheet metal.
9.
Using the supplied nut and bolt attach fuse holder to the under side of the radiator support sheet metal. Tighten to 3.5-4.5 N-m (31-41 in-lb). Refer
to Figure 3-DD.
CAUTION
Dry fit all of the connectors. Do Not use any conductive lubricant.
10.
Connect jumper harness to the cooling fan motor harness and to existing vehicle harness.
11.
Secure the vehicle wiring harness to the fan shroud mounting pad located at the 11 o'clock position (if vehicle so equipped) or at the 12 o'clock
position, using the existing harness retainer. See Figure 3-DD.
12.
Connect battery negative cable.
13.
Check engine cooling fan motor for proper operation.
14.
Install sight shield.
15.
Close hood.
Dealer Letter
December 22, 1995
To:
All Ford of Canada Dealers
Attention:
Dealer Principal
Service Manager
Parts Manager
Subject:
