Taurus V6-182 3.0L FF (1995)
Ignition Cable Routing
CAUTION: Proper installation of ignition wires is critical to vehicle operation. If any ignition wire is not properly installed on spark plug or
ignition coil, both spark plugs connected to that ignition coil may not operate under load.
2. Install each ignition wire to the proper terminal on the ignition coil. The terminals on the ignition coil and the ignition wire are numbered. Make
sure the boots are fully seated and that both ignition coil boot locking tabs are engaged.
3. Route ignition wire and ignition wire separators.
4. Connect ignition wire to spark plug.
