Taurus V6-182 3.0L FF (1995)
Fuel Filler Hose: Service and Repair
REMOVAL
1. Open filler door to remove three screws retaining fuel tank filler pipe to pocket. Mark fuel tank filler cap tether location.
2. Raise vehicle.
3. Loosen filler and vent hose on fuel tank filler pipe.
4. Remove bolt retaining fuel tank filler pipe assembly to underbody.
5. Remove fuel tank filler pipe.
INSTALLATION
1. Position fuel tank filler pipe in body location.
2. Connect hoses with clamps to fuel tank filler pipe.
3. Install underbody fuel tank filler pipe assembly bolt. Tighten to 4-6 Nm (36-53 lb in).
4. Lower vehicle.
5. Install fuel tank filler cap to tether location and install three retaining screws.
