Taurus V6-182 3.0L FF (1995)
Combination Switch: Service and Repair
Turn Signal and Windshield Wiper Switch
Removal
1. Disconnect battery ground cable.
2. Tilt column to lowest position and remove tilt steering column lock lever.
3. Remove ignition switch lock cylinder.
4. Remove shroud screws and remove upper steering column shroud and lower steering column shroud.
5. Remove two self-tapping screws retaining turn signal and windshield wiper switch to steering column tube casting. Disengage turn signal and
windshield wiper switch from casting.
6. Disconnect the two electrical connectors.
Installation