Taurus V6-182 3.0L FF (1995)
15. Install tire and wheel assemblies.
Tighten lug nuts (1012) to 115-142 Nm (85-105 ft-lbs.).
16. Remove jackstands and lower vehicle.
17. From inside vehicle, push steering column tube boot end out of vehicle and install over steering gear housing.
18. Install steering column gear input shaft coupling to power steering gear shaft and yoke assembly.
Tighten bolt to 41-51 Nm (30-38 ft-lbs.).
19. Install inner steering column tube boot to cowl panel.
20. Install steering column gear input shaft coupling to power steering gear shaft and yoke assembly.
21. Fill with Premium Power Steering Fluid E6AZ-19582-AA or equivalent meeting Ford specification ESW-M2C33-F.
22. Bleed power steering system.
23. Check system for leaks and proper operation.
24. Adjust toe setting.
