Taurus V6-182 3.0L FF (1995)
Drum Brakes - Hub And Bearing
Installation
1. Position rear hub on rear wheel spindle.
2. Install new rear axle wheel hub retainer and tighten to 255-345 NM (188-254 ft-lbs).
3. Install new rear hub cap grease seal using Coil Remover T89P-19623-FH or equivalent.
Tap on tool until grease cap is fully seated.
4. Install brake drum on rear hub.
Install two pushnuts that retain drum.
5. Install wheel and tire assembly.
6. Lower vehicle.
