Taurus V6-183 3.0L VIN U FI (1993)
7. Rotate caliper away from rotor.
8. Remove inner and outer brake pads.
Front
Brake Caliper
1. Remove tire and wheel assembly.
CAUTION: Use care to avoid damage or interference with bleeder screw fitting during removal.
2. Remove caliper.
CAUTION: Do not let the caliper hang with its weight on the brake hose.
3. Remove outer pad by pushing pad to move "buttons" from caliper housing and slipping down caliper leg until clip is disengaged.
4. Remove inner pad by pulling it straight out of piston.
NOTICE: Inner pad removal force may be as high as 45-90 Nm (10-20 ft lb).
5. Inspect both rotor braking surfaces.
