Taurus V6-183 3.0L VIN U FI (1993)
Pinch Bolt And Slider Pin
4. Remove residue from the pinch bolt threads and apply one drop of Threadlock and Sealer E0AZ-19554-AA or equivalent. Install pinch bolts and
tighten to 31-35 Nm (23-26 ft lb).
Parking Brake Cable Assembly
5. Attach cable end to parking brake lever. Install cable retaining clip on caliper assembly.
6. If brake hose was disconnected, install brake flex hose to caliper using new washers. Tighten retaining bolt to 41-54 Nm (30-40 ft lb) and perform
system brake bleeding procedures.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.
CAUTION: Failure to tighten lug nuts in a star pattern may result in high rotor runout, which will speed up the development of brake roughness,
shudder and vibration.
