Taurus V6-183 3.0L VIN U FI (1993)
Heater Core Case: Service and Repair
Without Air Conditioning
REMOVAL
1. Disconnect the battery ground cable.
2. Drain the coolant from the radiator into a clean container.
3. Disconnect the heater hoses from the heater core. Plug the heater core tubes or blow any coolant from the heater core with low-pressure air.
4. Disconnect the vacuum supply hose from the in-line vacuum check valve in the engine compartment.
5. Remove the instrument panel, please refer to Body and Frame/Interior Trim/Dash Board/Service and Repair/ See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
6. Remove the screw holding the instrument panel shake brace to the heater case. Remove the instrument panel shake brace.
7. Remove the floor register and the rear floor ducts from the bottom of the heater case.
