Taurus V6-183 3.0L VIN U FI (1993)
8.
Check operation of headlights, marker lights, tail lights and instrument panel lights.
9.
Disconnect battery negative cable.
10.
Remove headlamp knob and disconnect headlamp switch.
11.
Fold wiring back in an "S" onto the harness and wrap with electrical tape to allow the extra wiring to be fitted into the instrument panel. See Figure
9.
12.
Return to Step 10 on this attachment.
MARK VIII (HARNESS KIT PART # F8LZ-11654-BA)
1.
Remove headlamp switch connector from the wire harness by cutting the wires 1/2 inch (13 mm) from the connector. Discard the old connector.
