Taurus V6-183 3.0L VIN U FI (1993)
Combination Switch: Description and Operation
Headlamp Dimmer/Flash-to-Pass Switching
Headlamp Dimmer/Flash-to-Pass Switching
The turn signal lever also operates the headlamp dimmer switch and the flash-to-pass feature. High beam is selected by pushing the turn signal lever
away from the driver to the stop. Releasing the lever will maintain high beams. Low beam is selected by moving the turn signal lever toward the driver
from the high beam position. Release of the lever will maintain low beams.
To operate the flash-to-pass feature, pull the lever gently toward the driver. When the lever is released, it will return to the LO beam position. If
driving without headlamps on, use of the flash-to-pass feature will turn on the high beams until the turn signal lever is released. If the headlamps are
turned on, the low and high beams will be on until the turn signal lever is released.
NOTE: Excessive force used to hold the turn signal lever in the flash-to-pass function followed by quick release may result in incorrect headlamp
dimmer selection of high beam. The driver must be cautioned to avoid this condition.
