ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

PCM - Hesitation/Surge At 35 to 45 MPH|Page 4925 > < PCM - Hesitation/Surge At 35 to 45 MPH|Page 4919
Page 1
background image

Throttle Body: All Technical Service Bulletins
PCM - Hesitation/Surge At 35 to 45 MPH

Article No. 
97-14-18

07/07/97

^

HESITATION - SURGE - 56-72 KM/H (35-45 MPH) IN
AMBIENT TEMPERATURES OF -18 TO 10
DEGREES (0-50 DEGREES F) - VEHICLES WITH 
3.0L ENGINE

^

TRANSMISSION - DELAYED ENGAGEMENT FROM 
REVERSE TO DRIVE - IN AMBIENT 
TEMPERATURES OF -18 TO 10 DEGREES (0-50 
DEGREES F&VEHICLES WITH 3.0L ENGINE

LIGHT TRUCK: 
1997 AEROSTAR

CALIBRATION: 
7-56J-R05, 7-56J-R10, 7-56T-R05, 7-56T-R10

WARNING

THIS MODIFICATION IS AUTHORIZED ONLY FOR THE LISTED ENGINE. PERFORMING THIS MODIFICATION ON OTHER ENGINE
CALIBRATIONS IS UNAUTHORIZED AND COULD CREATE LIABILITY UNDER APPLICABLE FEDERAL OR LOCAL LAWS.

ISSUE: 
Hesitation/surge may be present on some vehicles at speeds of 56-72 km/h (35-45 mph) in all ambient temperatures. A delayed cold transmission
engagement from reverse to drive may also occur. This may be due to the Exhaust Gas Recirculation (EGR) calibration.

ACTION: 
Reprogram the Powertrain Control Module (PCM). The new calibration should reduce the possibility of hesitation/surge and delayed engagement. Refer
to the following PCM Application Chart for correct PCM calibrations.

Obtain an Authorized Modification Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.

PART NUMBER

PART NAME

F79Z-12A650A0

Powertrain Control Module (PCM) 

F79Z-12A650BD

Powertrain Control Module (PCM)

PCM - Hesitation/Surge At 35 to 45 MPH|Page 4925 > < PCM - Hesitation/Surge At 35 to 45 MPH|Page 4919